Part detail
Body Length: 0.230 inches minimum and 0.400 inches maximum Reliability Indicator: Not established Electrical Resistance: 649.000 ohms
101A-649OHMSPORM0-5PCTNSN5905-01-018-2751CAGE53655
Body Length: 0.230 inches minimum and 0.400 inches maximum Reliability Indicator: Not established Electrical Resistance: 649.000 ohms
Detailed description
101A-649OHMSPORM0-5PCT procurement notes
Body Length: 0.230 inches minimum and 0.400 inches maximum Reliability Indicator: Not established Electrical Resistance: 649.000 ohms
Specifications
Reference data
Multi-line procurement
Sourcing more than one part?
Upload a bill of materials (BOM) or paste a list of part numbers — every line bundles into a single RFQ. No checkout, no payment.
Compliance
- AS9120:2025· Aerospace QMS
- ISO 9001:2015· Quality Management
- FAA AC 00-56B· Voluntary Industry Distributor Accreditation
- U.S. ONLY· Fulfillment
NSN Information for Part Number 101A-649OHMSPORM0-5PCT with NSN 5905-01-018-2751, 5905010182751
Characteristics Data of NSN 5905-01-018-2751, 5905010182751
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 |
| AAPP | ELECTRICAL RESISTANCE | 649.000 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.500 TO 0.500 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 145.0 |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARB | TERMINAL TYPE | WIRE LEAD |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.230 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 02987-1489231 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |